Setting Up A Skyq Ir Remote - Systemline S7 NetAmp Instruction Manual

9.0 Setting up a SkyQ IR remote

9.1 Hold down buttons 1 and 3 on the Sky Q remote (not touch remote) you should see red LED
flash twice.
9.2 Press ? (bottom right).
9.3 Press 0 2 9 7 each digit should respond with a flash on the red LED the last digit will give 2
flashes from the Red LED which will indicate that the code has been successfully stored.
9.4 Volume up, down and mute should now operate the NetAmp.
Volume up
Volume down
Mute
MUTE
?
8