1 Introduction
1.1 Purpose
This instruction manual describes the installation and maintenance of the AP300 Series Industrial pH and Redox (ORP) Electrode
Systems.
1.2 Sensors and Systems
There are three main sensor types:
— AP301 Standard twist-lock – insertion, flow-through, immersion
— AP302 Screw in – insertion, immersion
— AP304/5 Ball valve insertion, hot-tap
1.3 Sensor Descriptions
1.3.1 AP301
Model AP301 sensors are twist-lock general purpose insertion, flow-through or immersion style. The sensor body is molded from
chemically resistant PPS (Ryton).
The sensor can be adapted to 1 inch fittings by a threaded Ryton twist-lock adaptor.
An optional PVC electrode guard protects the electrode in immersion applications.
Dimensions in mm (in.)
165.1
(6.50)
No. 1 18 Viton
O-Rings 2 Each
Sensor
1 in. NPT Flow Cell
(Part No. 7670046)
Fig. 1.1 AP301 Sensors and Dimensions
Optional Threaded Adaptor
Flow
71.1
(2.80)
3
/
in. NPT Conduit Port
4
3
/
in. NPT Flex Conduit and Coupling
4
Optional PVC Immersion Guard
95.0 (3.74)
3
/
in. NPT
4
2.5
(0.10)
120.0 (4.73)
64.5
(2.54)
276.9 (10.90)
Sensor with Optional Junction Box
AP300 | Combination pH/Redox (ORP) sensors | IM/AP300 Rev. J
33.0 (1.30)
Electrode
26.7 (1.05)
24.4 (0.96)
3