Download Print this page
Traxxas 6590 Installation Instructions

Traxxas 6590 Installation Instructions

Unlimited desert racer. led light bar kit

Advertisement

Quick Links

LED Light Bar Kit Installation Instructions
#6590 Kit Contents:
High-Voltage Power Amplifier
3x12mm button-head screws (2)
#8485 Kit Contents:
High-Voltage Power Amplifier
Front grill LED light bars (2)
Rear LED light bar
Windshield LED light bar
LED light bar mounts (2)
2-in-1 wire harness
3x10mm button-head screws (4)
3x12mm button-head screws (4)
3x15mm button-head screws (4)
3x20mm button-head screws (2)
Zip ties (10)
Vehicle Body and Body Interior
Removal (Fig. 1):
1. Remove the 3x8mm flat-head screws
(12) from the vehicle body and
remove the body from the chassis.
2. Remove the 3x15mm button-head
screws (4) from both sides of the
center "X" roof support brace and
remove the brace.
3. Remove the 3x15mm button-head
screw, 3x20mm button-head screw,
and 3x30mm button-head screw
from the left side (driver side) of the
tube chassis to allow removal of the
body interior.
4. Remove the 3x8 flat-head screws from
the body interior (4) and remove the
interior from the chassis.
Body modification (Fig. 2 and 3):
If either the front grill LED light bar (#8486) or the rear LED
light bar (#8487) are being installed, the vehicle body will need
modification. Use Lexan® body scissors to cut out the section(s)
as indicated. Templates are provided at the bottom of page 3.
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
#8486 Kit Contents:
Front grill LED light bar
LED light bar mounts (2)
3x10mm button-head screws (2)
3x15mm button-head screws (2)
3x20mm button-head screws (2)
Zip ties (3)
#8487 Kit Contents:
Rear LED light bar
3x12mm button-head screws (2)
Zip ties (4)
#8488 Kit Contents:
Windshield LED light bar
3x15mm button-head screws (2)
Zip ties (2)
#8489 Kit Contents:
2-in-1 wire harness
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
Fig. 2
TR AXXAS .c om
Covers Parts #6590, 8485, 8486, 8487, 8488, 8489
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x8 FCS
3x20 BCS
FRONT
Cut away material
102mm x 28mm
Visitez Traxxas.com/manuals pour télécharger
les instructions dans votre langue.
Visite la página Traxxas.com/manuals para
descargar el instrucciones en su idioma.
Auf Traxxas.com/manuals, können Sie
anleitung in Ihrer Sprache downloaden.
3x8 FCS
3x15 BCS
3x15 BCS
3x15 BCS
3x8 FCS
3x30 BCS
3x8 FCS
3x15 BCS
Fig. 3
Cut away material
102mm x 18mm
KC2619-R01
Fig. 1
3x15 BCS
3x8 FCS
3x8 FCS
REAR
Rev 180718

Advertisement

loading
Need help?

Need help?

Do you have a question about the 6590 and is the answer not in the manual?

Questions and answers

Summary of Contents for Traxxas 6590

  • Page 1 Use Lexan® body scissors to cut out the section(s) 102mm x 18mm as indicated. Templates are provided at the bottom of page 3. TR AXXAS .c om Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com KC2619-R01 Rev 180718...
  • Page 2: Assembly Diagram

    CAUTION! To prevent damage to the electronic speed control (ESC) and/or the high-voltage power amplifier, ensure the batter(ies) are disconnected before plugging the amplifier into the ESC. High-Voltage Power Amplifier Installation: Fig. 6 1. Install the high-voltage power amplifier (A) on the left side of the vehicle chassis (two screw bosses on top of the battery compartment).
  • Page 3 Front Grill High Beam Headlights Low Beam Windshield Lights Change the high-voltage power amplifier settings and gain access to additional functions using the Traxxas Link App (available in the Apple High Beam Windshield Lights App Store or on Google Play™). The TQi transmitter with the Traxxas Tail Lights Link Wireless Module (part #6511, sold separately) are required.
  • Page 4 Front Wiring Diagram Front Grill LED Light Bars installed Rear LED Light Bar installed...

This manual is also suitable for:

84868487848584898488