Motorola SC 4812ET RF Hardware Installation Manual page 66

How to Unpack the SC 4812ET BTS
– continued
How to Inspect for
Damage
3
How to Inspect Equipment for
Damage
66
Before installing any equipment, inspect it for damage as described in
Table 3-3. Report any damage found to the appropriate supervisory
personnel.
Step
1
2
3
SC 4812ET RF and Power Cabinet Hardware Installation Manual
TM
WARNING
– Static sensitive equipment requires the use of ESD
protective gear such as a wriststrap to be used during
the installation and repair.
– A wriststrap is supplied with the installation hardware
and the ESD jack is located in the C–CCP Shelf in
the RF Cabinet (Figure 1-6).
Table 3-3: Inspecting Cabinets for Damage
Inspect the exterior of the RF and Power Cabinet for:
– Dents
– Scratches
– Squareness of the cabinet.
Inspect the interior of the RF and Power Cabinet for:
– Bent FRU brackets
– Dislodged FRUs
– Cables that may have become disconnected.
Report any damage found to the appropriate supervisory
personnel.
DRAFT
Action
Apr 2001
V03.03