Connecting Stand Hole Cover; To Install Portrait - LG 47VL10 Owner's Manual

8
ASSEMBLING AND PREPARING

Connecting stand hole cover

1
Take the parts for the stand out of the box and
assemble them as shown in the picture.
Stand hole cover
2
Place a soft cloth on the table and put the
product with the screen facing downward.
Connect the stand hole cover as shown in the
following picture.
3
Use the screws to secure the stand hole cover
on the rear side of the product as shown in the
diagram.

To install Portrait

- Only on some models.
When installing Portrait, rotate it clockwise based
on its front.
Screws
NOTE
y
When using the wall mounting bracket or
the portrait scene mode, the opening can be
covered by the stand hole cover.