LG 47VL10 Owner's Manual page 16

Setting
Color Color Settings
Temperature
Option
Cool
Medium
Warm
User
Advanced Gamma
(Low/Medium/
High)
Film Mode
(On/Off)
Black Level
(Low/High)
NR
(Off/Low/High/
Adaptive)
Aspect Ratio Changes the image size to view images at its optimal size. ( See p.16 )
Picture Reset Return Picture Mode, Color Temperature, Advanced, Aspect Ratio to the default factory settings.
SCREEN Customizes the PC display options in RGB mode.
(In RGB, HDMI-
Option
DTV)
Auto Config.
(RGB PC input
only)
Manual Config.
XGA Mode
(RGB-PC only)
Reset
Description
Slightly purplish white.
Slightly bluish white.
Slightly reddish white.
Select this option to use the user-defined settings.
You can adjust brightness of dark area and middle gray level area of the picture.
» Low: Make dark and middle gray level area of the picture brighter.
» Medium: Express original picture levels.
» High: Make dark and middle gray level area of the picture darker.
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch movies.
» Low: The picture of the screen gets darker.
» High: The picture of the screen gets brighter.
» Auto: Realizing the black level of the screen and set it to High or Low
automatically.
Set black level of the screen to proper level.
This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M),
HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.
Reduces screen noise without compromising video quality.
This button is for the automatic adjustment of the screen position, clock and
phase. This function is available for analog signals only.
* Phase, Clock function are not available in HDMI/DVI DTV.
If the picture isn't clear after auto adjustment and characters are still trembling,
adjust the picture phase manually.
* Phase, Clock function are not available in HDMI/DVI DTV.
Phase : To adjust the focus of the display. This item allows you to remove any
horizontal noise and clear or sharpen the image of characters. This
function is available for analog signals only.
Clock : To minimize any vertical bars or stripes visible on the screen background.
The horizontal screen size will also change. This function is available for
analog signals only.
H-Position : Moving the screen position horizontally.
V-Position : Moving the screen position vertically.
H-Size : Adjust the horizontal size of the screen.
V-Size : Adjust the vertical size of the screen.
For more improved or better picture quality, select the same mode corresponding
to computer resolution.
Return Manual config. and XGA Mode to the default factory settings.
CUSTOMIZING SETTINGS
15