6
ASSEMBLING AND PREPARING
Connecting the stand
- Only on some models.
1
Take the parts for the stand out of the box and
assemble them as shown in the picture.
Stand
cable management
2
Place a soft cloth on the table and put the
product with the screen facing downward.
Connect the stand as shown in the following
picture.
3
Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
Connecting the Speakers
- Only on some models.
1
Screws
2
Mount the product onto the speaker by using
a screw as shown in the following connect the
speaker cable.
After installing your speakers, use holders and
cable ties to organize the speaker cables. (This
feature is not available in all model.)
NOTE
y
You can set the Power indicator to on or off
by selecting
OPTION
in the main menus.