D-Link DAP-1720 Quick Install Manual page 7

Configure the DAP-1720
Using a Web Browser (Optional)
You may log into the web-based configuration utility on the DAP-1720 to perform
the following tasks:
• Upgrade firmware
• Change wireless and network settings
• Change the login password
1
Plug the DAP-1720 in an available outlet near your router. You may move it
to a more suitable location after configuration.
2 Open the wireless utility on your wireless device or computer. Select the
Wi-Fi Network name (from the Wi-Fi Configuration Card) and enter the
password. You may also connect the DAP-1720 to your router or computer
using an Ethernet cable.
Open a web browser (e.g., Internet Explorer, Firefox, Safari, or Chrome)
3
and enter http://dlinkap.local./. You may also enter the IP address of the
DAP-1720.
DAP-1720 Install Guide
Wi-Fi Name(SSID) 2.4Ghz:
dlink-xxxx
Wi-Fi Name(SSID) 5GHz:
dlink-xxxx-5GHz
Password: xxxxxxxx
To con gure your extender, go to:
http://dlinkap.local.
Or http://192.168.0.50
Username: "Admin"
Password:" " (leave the eld blank)
7