Advertisement
3-1.Installation
* Open the box and take out the silent base.
* Insert the silent base with smooth face downward and slot it under the back portion of machine.
* Keep silent base intact while machine is operation and after use.
* Find a screw from document pack and screw the silent base into the screw hole on the base of the
machine.
3-2.Position the machine properly
(1) Position the washing machine at solid, the level ground, and the gradient should not exceed 2゜;
(2) Please don't put the machine on the shelf;
(3) The distance between the machine and walls should be about 2 cms;
(4) When the ground is not smooth, adjust the right front foot spanner of machine;
(5) After adjusting, please push the foot spanner back.
3．3 Water connecting
(1) Open the box and take out the inlet hose;
(2) The following picture shows the method how to connect the inlet hose;
(3) After being lengthened, the whole length of the inlet hose can't exceed 5 meters.
3-4.Connecting the drain hose
(1) Open the box and take out the drain hose;
(2) The highest point of the drain hose can't exceed 8 cms, otherwise it should cause drain breakdown;
(3)Don't seal up the drain hose to the sewer completely or directly put it into the water, otherwise it
siphon may occured;
(4) After being lengthened, the whole length of the drain hose can't exceed 3 meters.
4
Hide quick links:
Advertisement
