Liquid Sealing Contour Thermostat Housing - Textron MPE 850 OFF-ROAD Repair Manual

LIQUID SEALING CONTOUR THERMOSTAT HOUSING

1. Clean the sealing surfaces on the crankcase
and thermostat housing.
2. When the thermostat housing has a sealing
groove apply the silicone liquid seal into
1
the sealing groove on the thermostat housing
including an overhang of 1 mm without gaps.
or
3. When the thermostat housing has no sealing
groove apply the silicone liquid seal
thermostat housing without gaps as illustrated.
2
TD410023-B RLF
1
on the
2
SPECIFICATIONS
D
87