Network Interface Card - Samsung ML-1650 User Manual

Network Interface Card

Review the precautions on page H.1 and then follow this procedure to install the Network card
option in your printer.
1
Unpack the network printer card. You
should find the following items.
2
Turn the printer power off and unplug
all cables from the printer.
3
Remove the two screws on the back of
the printer, then remove the control
board cover. See the figure on page H.2.
4
Remove the two screws, then remove
the plate.
5
Align the connector on the network card
with the connector on the control board.
Push the card firmly into the connector
until it is completely inserted in place.
P O
H.4
RINTER PTIONS
Network card
User's guide
(PortThru)
CD-ROM
(SyncThru)