Samsung ML-1650 User Manual page 152

TEST
• Self Test prints the configuration sheet. A list of the user
default settings, the installed options, and the amount of
printer memory available prints.
• Demo Page prints the demonstration page. It shows the
printer features and specifications.
PCL
• Typeface allows you to select the desired typeface. This
setting is ignored when the software application specifies a
font.
• Symbol set determines the symbol set. A symbol set is a set
of alphabetic and numeric characters, punctuation, and special
symbols used when printing with a selected font.
• Pitch sets the font pitch (only if you have selected a scalable
monospaced font). Pitch refers to the number of fixed-space
characters in a horizontal inch of type.
• Lines Per Page sets the number of lines that print on each
page. The setting can range from 5 to 128 lines per page.
• Point Size sets the font point size (only if you have selected a
scalable typographic font). Point size refers to the height of the
characters in the font. One point equals approximately 1/72 of
an inch. You can select point sizes from 4.0 to 999.75 in
increments of 0.25 points.
• COURIER determines the courier font type: Regular or Dark.
• Font List prints the font list showing all the fonts available for
PCL emulation.
PS3
• Font List prints the font list showing all the fonts available for
PostScript (only available when the PostScript option is
installed).
• Print error information: Specifies whether to print PostScript
error information after your document has been printed. If you
want the printer to print an error page when error occurs in
the print job, set to ON.
Selecting Print Settings
P DOS A
RINTING FROM PPLICATIONS
D.5