Samsung ML-1650 User Manual page 100

6
Replace the exit roller.
Make sure that you click the right
end of the roller back in place. If you
fail to do so, the printer system will
recognizes that the printer cover is open
or that a system fuser error has
occurred, and the Error light on the
control panel will turn on.
7
Replace the stopper and close the rear
output tray.
8
To resume printing, open the top cover,
and then close it close it again.
Note:
If the Paper and the Error lights do
not turn off, there is still jammed paper
inside the printer. Check the input area
and the inside of the printer.
Clearing Paper Jams
1
2
P S
ROBLEM OLVING
7.9