Download Print this page

Whittier Wood 1854GBCHb Assembly Instructions Manual

Cascade queen storage bed

Advertisement

Quick Links

Model #
1854GBCHb
Cascade Queen
Storage Bed
Glazed Black Cherry finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, phone, fax, mail or email your request to the Whittier
Wood Products customer service department.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Remove items before you move this unit.
Do not overload the drawers.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery
Production Code:
VN
WARNING
07/14

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1854GBCHb and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whittier Wood 1854GBCHb

  • Page 1 Model # IMPORTANT NOTES: For normal household use only. Not recommended for commercial use. 1854GBCHb Remove items before you move this unit. Do not overload the drawers. Before you load or move this unit, tighten all screws and supports. Before you begin your project, completely read the Assembly Cascade Queen Instructions.
  • Page 2 #8 x 1" Black Screw (inserted) #8 x 1-1/4" Black Screw (9 inserted) #8 x 1-5/8" Black Screw (inserted) #8 x 1-3/4" Pan Head Screw (inserted) 1/4" T-Nut (inserted) Bracket #10 x 3/4" Pan Head Screw (inserted) 1854GBCHb — Page 2 — 07/14...
  • Page 3 Drawer Pull (attached) Drawer Slides (installed) 3 sets #6 x 3/4" Philtruss Screw (inserted) #8 x 2" Black Screw (inserted) #8 x 7/8" Black Lo-Profile Screw (inserted) #8 x 1-1/4" Machine Screw Tuscan (installed) 1854GBCHb — Page 3 — 07/14...
  • Page 4 Remove the Trestles (C) and Assembled Feet (D) from the back of the Footboard (Ba) and place them off to the side. See Figure 1. Fig. 1 Shipping Straps Place both Pedestals (Sa) approximately 63" apart as shown in Figure 2. 63" Fig. 2 1854GBCHb — Page 4 — 07/14...
  • Page 5 To attach the Footboard (Ba) to the Pedestal Assembly (Sa), align the Brackets and slide the Pedestal Assembly down on to the Footboard (Ba). See Figures 3 and 3a. Fig. 3a Fig. 3 Repeat step three for the left side. Fig. 4 Fig. 4a 1854GBCHb — Page 5 — 07/14...
  • Page 6 1854GBCHb Cascade Queen Storage Bed Assembly Instructions This assembly requires two people. Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the Headboard (A). See Figure 5. Fig. 5 1854GBCHb — Page 6 — 07/14...
  • Page 7 Insert two 1/4" x 1-3/4" Hex Bolts (J) and Washers (K) and tighten. See Figures 6 and 6a. Brace Fig. 6a Footboard First brace Second brace Fig. 6 Headboard removed for illustration purposes. 1854GBCHb — Page 7 — 07/14...
  • Page 8 Insert two 1/4" x 1-3/4" Hex Bolts (J) and Washers (K) and tighten. See Figures 7 and 7a. Repeat for the fourth brace. Trestle with T-Nuts (C) Brace Fourth brace Fig. 7a Third brace Fig. 7 1854GBCHb — Page 8 — 07/14...
  • Page 9 Trestles. Attach with Washers (K) and 1/4" x 1-3/4" Hex Bolts (J). See Figures 8 and 8a. Trestle with T-Nuts (C) Fourth set of Trestles Fig. 8a Third Trestles Fig. 8 1854GBCHb — Page 9 — 07/14...
  • Page 10 Adjust all three Glides (F) found at the bottoms of the Assembled Feet so that the Glides just touch the floor. IMPORTANT: Make sure the Glides touch the floor and carry weight. Fig. 9a Second set of Trestles Fig. 9 1854GBCHb — Page 10 — 07/14...
  • Page 11 #6 x 1/2" Philtruss Screws (M). Repeat for the other side. See Figures 10 and 10a. Fig. 10a Fig. 10 This step requires two people. Place the bed at its final destination. If needed, adjust center feet. 1854GBCHb — Page 11 — 07/14...
  • Page 12 13. Place the Deckboards (Xa) as shown in Figure 13. There should be a small gap between each deckboard. Secure with #8x1-1/4" Black Screws (O). If at some time you need to adjust the center feet, remove a deckboard, adjust the glides and reattach the deckboard. x 24 Fig. 13 1854GBCHb — Page 12 — 07/14...