Samsung CLX-3160 User Manual page 80

Message Meaning
The mail size is
Mail Exceeds larger than the
Server Support supported size by
SMTP server.
Memory Full The memory is full.
Manual Feeder There is no paper in
Paper Empty the manual feeder.
Paper has jammed
Manual Feeder
in the feeding area
Paper Jam 0
of the manual feeder.
There is a problem
Network Error
with the network.
The speed button or
speed dial number
Not Assigned you tried to use has
no number assigned
to it.
Single page data
One Page is
exceeds the
Too Large
configured mail size.
Open Heat Error
There is a problem
in the fuser unit.
Cycle Power
You are in the Add
Operation Page/Cancel Job
Not Assigned operation, but there
are no jobs stored.
The output tray of
Out-Bin Full the machine is full of
paper.
Over Heat Error
There is a problem
in the fuser unit.
Cycle Power
Paper has jammed
Paper Jam 0
in the feeding area
Open/Close Door
of the tray.
Suggested solutions
Divide your mail or
reduce the resolution.
Delete unnecessary
fax jobs and
retransmit after more
memory becomes
available.
Alternatively, split the
transmission into
more than one
operation.
Load paper in the
manaul feeder.
Clear the jam. See
page 14.4.
Contact your network
administrator.
Enter the number
manually using the
number keypad or
store the number or
address.
Reduce the resolution
and try again.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Check the display to
see if there are any
scheduled jobs.
Remove paper.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Clear the jam. See
page 14.2, 14.3.
14.7
Message Meaning
Paper has jammed
Paper Jam 1
in the paper exit
Open/Close Door
area.
Paper has jammed
Paper Jam 2
In the fuser area or
around the toner
Check Inside
cartridge
The paper size
specified in the
Tray 1 printer properties
Paper Mismatch does not match the
paper you are
loading.
The paper size
specified in the
Tray 2 printer properties
Paper Mismatch does not match the
paper you are
loading.
Paper has jammed
Tray 2
In the paper feed
Paper jam 0
area.
Power has turned off
then on and the
Power Failure machine's memory
has not been back
up.
The toner cartridge
Refilled you have installed is
[Color] Toner not genuine or
refilled.
This message
Replace appears between
[Color] Toner Toner Empty and
Toner Low status.
Replace The life of the part
[Part] expires totally.
Replace The life of the part
[Part] Soon expires soon.
<Troubleshooting>
Suggested solutions
Clear the jam. See
page 14.4.
Clear the jam. See
page 14.4.
Load the correct
paper in the tray 1.
Load the correct
paper in the tray 2.
Clear the jam. See
page 14.3.
The job which you
were trying to do
before the power
failure must be
completely re-done.
The print quality may
get poor if the refilled
toner cartridge is
installed, since its
characteristics may
significantly differ
from the genuine.
We recommend
Samsung-genuine
color toner cartridge.
Replace the toner
cartridge with a new
one. See page 13.5.
Replace the part with
a new one. Call for
service.
See page 13.10 and
call for service.