Carrier 40MBCQ Installation Instructions Manual page 13

Fig. 27 - Connect the two louver connectors
Fig. 28 - Connect display panel connectors
Grille Louver Motor Power.
Grille Display
5 Pin Port
10 Pin Port
CN40 Connector
Used for Wired Remote Control with
a 4 Pin Molex plug
Wired Remote Controller
Grille Display.
(Available as Accessory)
10 pin Molex plug to be
5 Pin Molex plug to be
connected to Control Board.
connected to Wired
Controller's cable
Grille Louver Motor Power.
5 Pin Molex plug to be
connected to Control Board
Fig. 29 - Panel Cassette Connections
13