Door Opening - Electrolux EHE6899 User Manual

6 electrolux.com.au

Door opening

Your refrigerator should be positioned to allow easy
access to a counter when removing food. For best use of
refrigerator drawers and freezer baskets, the refrigerator
should be in a position where both can be fully opened.
CAUTION
LED lighting
Your appliance is fitted with long life LED lighting. In the
unlikely event the LED lights should fail, then the LED
lights should be serviced by the service agent, to avoid a
safety hazard. Refer to the warranty page for contact
details.
Cabinet Leveling & Refrigerator Door Alignment
(if necessary)
Guidelines for final positioning of your refrigerator:
• All four corners of the cabinet must rest firmly on the
floor.
• The front should be slightly elevated to ensure that
doors close and seal properly.
• Doors should align with each other and be level.
Most of these conditions can be met by raising or
lowering the adjustable front rollers.
To level the cabinet using the front rollers:
1. Slightly open freezer drawer if the toe grill is installed.
Lift the toe grille and gently pull forward.
2. Make initial cabinet adjustments by using the front
roller height adjusting screws. Use a 3/8 inch socket
wrench to turn the adjustment screws (1 per side).
To raise: turn adjustment screw clockwise.
To lower: turn adjustment screw counter clockwise.
3. Ensure both doors are bind-free with their seals
touching the cabinet on all four sides and that cabinet
is stable.
4. After unit is leveled, lower anti-tip leg using a 3/8 inch
socket wrench until it firmly contacts the floor.
To make final door height adjustments:
1. Open freezer drawer to make lower hinge visible.
2. Insert 6mm Allen wrench into the shaft of the lower
hinge.
3. Adjust the height by turning clockwise or
counterclockwise. Turning clockwise will lower the
door. Turning counterclockwise will raise the door.
Default setting is to the lowest height when you
receive your appliance.
Flipper Mullion
Adjust Flipper Mullion for proper connection with the
mullion guide by ensuring the flipper mullion is folded
and perpendicular to the fresh food door. If the
mullion guide is not in the correct position, it could
prevent the door from closing completely.
Raise
WRONG