Advertisement
6
• Unravel braid and twist into a pigtail.
• Trim braid.
8
• Notch core at the end.
• Twist back and peel bus
wire from core.
¼ in
(6 mm)
10
note: see step 1 for proper heating techniques.
• Slide 3/4 in (19 mm)
long tubes (Item F)
over bus wires.
• Shrink tubes
completely.
tHerMAl builDing solutions
2 in
(51 mm)
Raychem-IM-H57284-EMKXP-EN-1612
7
WArning: Do not cut or damage bus wires.
Damaged wires can overheat or short.
• Lightly score inner
jacket around and
down as shown.
• Bend heating cable
to break jacket at
score.
• Peel off jacket.
9
• Score between bus wires at inner jacket.
• Bend core to break free at inner jacket.
• Peel core and any remaining material
from bus wires.
11
• Remove 1 1/2 in (38 mm) insulation
from power supply lines.
• Remove 1 in (25 mm) insulation from
equipment grounding conductor.
1½ in
(38 mm)
2¼ in
(57 mm)
1 in
(25 mm)
3 / 10
Advertisement
