Regulatory Symbols - ADInstruments PowerLab Owner's Manual

Quality Management System ISO 9001:2008
ADInstruments manufactures products under a quality system certified as complying
with ISO 9001:2008 by an accredited certification body.

Regulatory Symbols

Amplifiers and signal-conditioners manufactured by ADInstruments that are designed
for direct connection to humans and animals are tested to IEC60601-1:2012 (including
amendments 1 and 2), and carry one or more of the safety symbols below. These
symbols appear next to those inputs and output connectors that can be directly
connected to human subjects.
Further information is available on request.
2
BF (body protected) symbol. This means that the input connectors
are suitable for connection to humans and animals provided there is no
direct electrical connection to the heart.
Warning symbol. The exclamation mark inside a triangle means that the
!
supplied documentation must be consulted for operating, cautionary or
safety information before using the device.
CE Mark. All front-end amplifiers and PowerLab systems carry the CE
mark and meet the appropriate EU directives.
Refer to booklet symbol. This symbol specifies that the user needs
to refer to the Instruction manual or the booklet associated with the
device.
Date of Manufacture/ Manufacturer's name symbol. This symbol
indicates the date of manufacture of the device and the name of the
manufacturer
WEEE directive symbol. Unwanted equipment bearing the Waste
Electrical and Electronic Equipment (WEEE) Directive symbol requires
separate waste collection. (See disposal section at the end of this
chapter)
Owner's Guide