Connecting The Set-Top Box To A Tv Set - Samsung SIR-T351 Owner's Instructions Manual

MD68-00XXXA(E)-CHAPTER 1
1
1
CHAPTER ONE
Connecting The Set Top Box

Connecting the Set-Top Box to a TV Set

Plasma Display Panel (PDP)
Connect an antenna cable to the RF input
1
jacks on the Set-Top Box.
Connect the Video Cables.
2
YP P
B R
between the DTV OUT(COMPONENT) jacks
on the Set-Top Box and the DTV INPUT jacks
on the PDP.
RGB format: Connect a video monitor
cable between the DTV OUT (RGB format)
jack on the Set-Top Box and the RGB VIDEO
IN jack on the PDP.
Connect the Audio Cables
3
Connect an audio cable between the Lt/Rt AUDIO OUT jacks on the Set-Top Box and the L/R
AUDIO IN jacks on the PDP.
NOTE
You must set "DTV OUT SELECT (YP
4/4/03 10:56 AM Page 13
format: Connect a video cable
P /RGB, DVI)" properly for the PDP INPUT jack.
B R
13