Checking The Digital-Signal Reception - Samsung SIR-T351 Owner's Instructions Manual

MD68-00XXXA(E)-CHAPTER 3
3
3
CHAPTER THREE
Operation

Checking the Digital-Signal Reception

Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital
(HDTV) channels have either perfect reception quality or you will not receive them at all.
So, unlike analog channels, you cannot fine tune a digital channel. But you can adjust
your antenna to improve the reception of available digital channels.
NOTE
"No Signal" may appear on the screen depending on the broadcast station conditions,
even if an incoming broadcast signal exists.
26
4/4/03 11:10 AM Page 26
Press the MENU button on the remote control.
1
Use the Menu Up/Down
2
buttons to highlight the
Channel icon and
press ENTER.
Use the Menu Up/Down
buttons to highlight the
Channel Signal Strength
icon and press ENTER.
If the signal strength meter
3
indicates that the signal is
weak, physically adjust your
antenna to increase the signal
strength. Continue to adjust
the antenna until you find the
best position with the strongest signal.
When you have finished adjusting your antenna, press EXIT.
4
CHANNEL CHANNEL
√ √
Memorize Channels
√ √
Add / Delete Channels
√ √
Check Signal Strength
Check signal strenght Check signal strenght