Getting Started; Hd Interactive Set-Top Box - Samsung GX-SH530CF User Manual

Getting Started

HD InTerACTIVe SeT-TOp BOx

The HD Interactive set-top box provides you with a host of features, including the menu system, volume control
and channel navigation . You can access these features via the control buttons on the front of the HD Interactive
set-top Box .
POWER LED
Green LED when box is ON and
Red LED when box is on STANDBY
NETWORK LED
Amber LED when connected
IMPORTANT
• When you switch off your TV set, you should always put the HD Interactive set-top box on stand-by mode for
regular software updates .
• Always place your HD Interactive set-top box on a smooth, flat surface .
• Air should circulate freely under and around the box to prevent overheating . Do not place anything on top of
your HD Interactive set-top box .
• Do not place the HD Interactive set-top box near wet or moist areas .
• If the display flickers and the HD Interactive set-top box does not change channels, unplug it from the wall
cable point and wait at least ten seconds before plugging it back again .
Press the ON/OFF button to reactivate the HD Interactive set-top box and try again .
• Do not dismantle the HD Interactive set-top box to attempt servicing it on your own . Please call 1633 .
MENU
Enters and exits MENU
to Network
RECORD LED
Blinking Red LED
when recording
BACK
Return to previous screen
NAVIGATION
BUTTONS
CLOCK OR CHANNEL DISPLAY
Display time during STANDBY or during normal viewing
Display channel number when a channel is selected
POWER ON/OFF
Pressing this button
alternates between ON
and STANDBY modes
OK
Confirm of selection
03