Connecting The Set-Top Box To A Tv Set - Samsung SIR-T151 Owner's Instructions Manual

1
1
CHAPTER ONE
Connecting The Set-Top Box

Connecting the Set-Top Box to a TV Set

Connect an Antenna cable to the RF Input
1
jack on the Set-Top Box.
Connect the Video cables
2
Digital Ready TV: Connect a Video cable
between the HDTV Interlace jacks (Y, P
P ) on the Set-Top Box and the DTV Input
R
jacks on the TV.
Normal TV: Connect a Video cable
between the Video Out jack on
the Set-Top Box and the Video Input jack
on the TV. Or, connect a S-Video cable
between the S-Video Output jack on the
Set-Top Box and the S-Video Input jack
on the TV.
Connect the Audio cables
3
Digital Ready TV: Connect an Audio
cable between the Dolby Digital Output
jack (fiber optic connector) on the Set-
Top Box and the Optical jack on the TV.
Or, connect an Audio/Video cable
between the Lt/Rt Analog Audio Output
jacks on the Set-Top Box and the L/R
Audio IN jacks on the TV.
Normal TV: Connect an Audio cable
between the Audio Out jacks on the
Set-Top Box and the Analog Left/Right
jacks on the TV.
NOTE
The TV set must be "digital compatible" (i.e., it must have the appropriate audio and digi-
tal-video terminals).
When 1080i, 720p or 480p (DTV) is selected with the Resolution Select switch on the rear
panel, the On Screen Displays (MENU, Electronic Program Guide...) are not supported for
Video OUT and S-Video OUT. The OSDs (MENU, EPG...) for Video OUT and S-Video
OUT are supported only when 480i (Analog) is selected.
1.3
,
B
<DTV Ready TV>
<Normal TV>