Cisco ASA 5506-X Easy Setup Manual page 7

9
Click [Next].
The ASA can act as a DHCP
server and provide IP address-
es to the hosts on your inside
network.
9
10
Click [Use Port Address
Translation (PAT)].
Select [Use Port Address Trans-
lation (PAT)] to share a single
external IP address for devices
10
on the inside interface. Select
[Use Network Address Transla-
tion (NAT)] to share several ex-
ternal IP address for devices on
the inside interface.
11
Click [Next].
11
3 Configuring ASA
12
Click [Next].
You can specify the addresses
of all hosts or networks, which
are allowed to access the ASA
using HTTPS/ASDM, SSH or
Telnet.
12
13
Enter the IP address for
the ASA FirePOWER mod-
ule.
For example, the "
13
works with the default configu-
14
ration.
14
Enter the IP address of the
Default Gateway.
For example, the
"
works with the default configu-
15
ration.
15
Click [Next].
Cisco ASA with FirePOWER Services Easy Setup Guide
192.168.1.2 "
192.168.1.1
"