Hitachi Compute Blade 2500 series, Compute Blade 500 series Installation Manual page 30

Internal RAID controllers and CB 520X/CB 520H B3 server blade
This section describes restrictions for the following RAID controller and the
systems.
• LSI SAS2008 RAID board (Internal SAS RAID controller)
• Internal SATA RAID controller for CB 520A A1 server blade
• CB 520X server blade
• CB 520H B3 server blade
Restrictions
• PCI path-through function in KVM guest environment
PCI path-through function in KVM guest environment (SR-IOV) is not
supported. Do not use this function.
• tboot package
Do not install tboot package (tboot-x.xx-x.el6.x86_64.rpm/ tboot-x.xx-
x.el6.i686.rpm). Click Base System > Base to show the Packages in Base
dialog box, and make sure that tboot package is unchecked.
When installing tboot package (tboot-x.xx-x.el6.x86_64.rpm/ tboot-x.xx-
x.el6.i686.rpm) by mistake, change the setting for /boot/grub/grub.conf
referring to 4. Customizing /boot/grub/grub.conf,
page
Deleting boot options:
1 Press any key when the following boot loader message appears.
.
2 Press E key when the following window appears.
.
2-10
Hitachi Compute Blade Series OS Installation Guide for Red Hat Enterprise Linux
2-15, Setting up after installation on page
Red Hat Enterprise Linux 6
Setup procedure on
2-15.