Hitachi Compute Blade 2500 series, Compute Blade 500 series Installation Manual page 19

or Hitachi Compute Blade 2500 Series Logical partitioning manager User
Guide or Hitachi Compute Blade 2000 User's Guide.
• Creating LPARs
Create LPARs. For details, see Hitachi Compute Blade 500 Series Server
Blade Setup Guide, or Hitachi Compute Blade 2500 Series Logical
partitioning manager User Guide or Hitachi Compute Blade 2000 User's
Guide.
Tip:
For installing and using Red Hat Enterprise Linux 6, the following LPAR
configuration is recommended:
Item
Processor 2 or more
Memory
2.0 GB or larger
Disk
The LPAR on which to install OS requires 40 GB or larger capacity.
Network 1 or more NICs
Notes:
1 Required to be no less than 1.
.
2 Required to be no less than 1.0 GB of memory per processor.
.
3 Required to be no less than 23 GB.
.
• Saving configuration information
Save the configuration information. For details, see Hitachi Compute
Blade 500 Series Server Blade Setup Guide, or Hitachi Compute Blade
2500 Series Logical partitioning manager User Guide or Hitachi Compute
Blade 2000 User's Guide.
• Activating LPARs
Activate the LPAR. For details, see Hitachi Compute Blade 500 Series
Server Blade Setup Guide, or Hitachi Compute Blade 2500 Series Logical
partitioning manager User Guide or Hitachi Compute Blade 2000 User's
Guide.
• Setting up boot order
Set up boot order for the LPAR; then, create boot option. You can also
change the boot order.
[Used on Web console]
For details, see Hitachi Compute Blade 500 Series Web Console User's
Guide, or Hitachi Compute Blade 2500 Series Logical partitioning
manager User Guide.
[Used on guest screen]
For details, see Hitachi Compute Blade 500 Series Logical partitioning
manager User's Guide, or Hitachi Compute Blade 2500 Series Logical
partitioning manager User Guide or Hitachi Compute Blade 2000
User's Guide.
Hitachi Compute Blade Series OS Installation Guide for Red Hat Enterprise Linux
Recommended value
1
2
Installation Overview
3
1-9