Hitachi Compute Blade 2500 series, Compute Blade 500 series Installation Manual page 14

1 Start a new web browser from the system console.
.
2 Enter the URL of management module web console (enter "https://
.
192.168.0.1/" when factory default setting) into the address field box of
the browser.
IP address of management module
URL of Web console
Tip:
•
•
•
3 Log in the Web console of the management module.
.
4 The following table describes the factory default account settings for the
.
system administrator.
User ID
Password
5 Click Resources tab on the menu screen; then, click a server blade, on
.
which to install the OS.
6 Click the Condition tab; then, click Server Blade Action then, click
.
Start remote console. This opens the Logon screen.
1-4
Hitachi Compute Blade Series OS Installation Guide for Red Hat Enterprise Linux
Table 1-2 Factory default account settings for the system
Item
The above URL indicates the default IP address of management
module, and port number is not entered since using default number.
If you changed the IP address of management module, and the port
number of web console, enter the corresponding URL for your
environment.
The URL is configured in the following form:
http://< IP address>:< port number> or
https://< IP address>:< port number>
The default port number:
http: 80
¢
https: 443
¢
Table 1-3 Factory default account settings for the system
Item
Installation Overview
administrator
192.168.0.1
https://192.168.0.1
administrator
Factory default
administrator
password
Factory default