Artel MVS Quick Start Manuals page 20

Baseline Plate:
Properties for the Baseline item can be modified by populating the
following fields:
• Plate Type: Select the Baseline Plate Type. The Plate Type must match the
Plate Type used for the corresponding verifications.
• Data File: If importing, browse for the data file.
• Baseline Bar Code: With the Bar Code Reader, scan and store the bar
code from the bottle of Baseline Solution.
• Show Plate Shaker Prompt: The property Show Plate Shaker Prompt
allows the operator to either pause the Batch to shake each plate or,
by choosing False, to skip the shaking step and run the Batch without
interruption.
• Show File Prompt: Select True to display the prompt at run-time, pausing
the run. Select False to enable the batch to import the data file at the
location set for that property.
Notes:
• When new solutions and/or plates are used, the stored bar codes must be updated.
• The Plate Shaker Control window within the Options menu can be used to shake the
plate(s) before beginning the batch.
• Alternative Solutions and Serial Dilution Layouts are not currently supported in the
Batch Verification function.
• Any required information that is not entered will be requested during run-time.
Verification:
Properties for the Verification item can be modified by populating the
following fields:
• Device ID: Choose a Device ID from the drop-down list.
• Layout ID: Choose a Layout ID from the list of compatible layouts.
• Plate ID: Choose a Plate ID from the list of compatible plates.
• Bar Codes | Data Files: Required bar codes can be scanned in advance
and data files can be pre-selected for importing.
• Show Plate Shaker Prompt: Select True to display prompt at run-time,
or False to run the batch without interruption.
• Show File Prompt: Select True to display the prompt at run-time,
pausing the run. Select False to enable the batch to import the data file
at the location set for that property.
Save and Run:
• Click OK to save the new Batch Verification or Cancel to discard it.
• Once a Batch Verification is created, select Start Batch Verification
from the Batch menu and then choose the appropriate Batch
Verification from the list.
19