Page 1
Mount the screen or touchpanel, use Set the balance, use a drill-driver with a 13 mm socket on outer BalanceBox® accessories springs marked green. Drive counter-clockwise 5 seconds each, repeat until balanced Thomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA...
Page 2
”) screws (not included) Remove application cover B Remove wall-frame covers C and D Lift BalanceBox onto the wall bracket, mark the top Fix at the bottom and level, then tighten. holes. Take BalanceBox down and drill holes Use 5mm Allen key www.balancebox.eu...
Need help?
Do you have a question about the 650 and is the answer not in the manual?
Questions and answers