Listening To A Cassette - Samsung MAX-DX75 Instruction Manual

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to the section entitled
"Precautions When Using Audio Cassettes" on page 64.
1 2 Press TAPE on
Switch the system
on by pressing the player to
select the Tape
STANDBY ON.
function.
Press the
4 5
Press the
button. The cassette
button if necessary.
starts playing.
• •
Side A : Tape ( ) button once. Rewind the cassette
• button.
Side B : Tape ( ) button twice
•
Fast-forward the cassette UP /
button.
51
Press the PUSH
3
OPEN ( ) of the
cassette deck to open
the cassette door and
insert a cassette.
•
Insert a cassette with the
recording/playback side facing
the cassette holder, and then
push the cassette door shut.
When you have
6
,
finished playback,
press STOP button.
/ DOWN
Selecting the Cassette Playback Mode
Your mini component system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically. .
Press REVERSE MODE until the appropriate
symbol is displayed.
• One side of the selected cassette and then stops.
:
• One side of the cassette.
:
• Both sides of the cassette indefinitely until you
:
press stop.
REPEAT A B Function
• Use this to a specific section again during playback.
• Set the start and end points of the section you want to
repeat 3 times.
• This is a useful when learning a foreign language.
• The TAPE REPEAT function can be used only on
sections that are longer than 7 seconds.
• You cannot set the end point(B) within 7 seconds after setting the start
point(A).
• Repeat A-B Function is available for TAPE only.
The other side of the cassette and then stops.
52