Kenwood KDC-BT268U Instruction Manual page 21

BLUETOOTH®
BLUETOOTH — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio
devices and switch between these five devices.
Audio player via Bluetooth
1 Press repeatedly (or press SRC on the remote control) to
select BT AUDIO.
2 Operate the Bluetooth audio player to start playback.
To On the faceplate
Playback/pause
Press
Press J / K.
Select group or
folder
Press S / T.
Reverse/
Forward skip
Reverse/Fast- Press and hold S / T.
forward
Repeat play Press repeatedly.
ALL REPEAT, FILE REPEAT,
REPEAT OFF
Random play Press and hold
select ALL RANDOM.
• Press
RANDOM OFF.
On the remote control
. Press
Press /
Press S /
Press and hold S /
.
( Not available )
to
( Not available )
to select
To
Select a file from a
folder/list
Switch between
connected Bluetooth
audio device
* Pressing the "Play" key on the connected device itself also causes switching of sound output
from the device.
Operations and display indications may differ according to their
availability on the connected device.
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD
car receiver's operations from the iPhone/iPod (via Bluetooth or via USB
.
input terminal) or Android smartphone (via Bluetooth).
.
Preparation:
Install the latest version of KENWOOD Remote application on your device
.
before connecting. For more information, visit
<www.kenwood.com/cs/ce/>.
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item ( 18), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4
Press and hold
To return to the previous setting item, press
On the faceplate On the remote control
Refer to "Select a
file from a folder/ ( Not available )
list" on page 8.
Press 5.*
( Not available )
to exit.
.
ENGLISH 17