Kenwood KDC-BT268U Instruction Manual page 18

BLUETOOTH®
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
MIC GAIN –10 to +10 (–4): The sensitivity of the microphone increases as the
number increased.
NR LEVEL –5 to +5 (0): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL –5 to +5 (0): Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Answer incoming call automatically
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [SETTINGS], then press the knob.
3
Turn the volume knob to select [AUTO ANSWER], then press the knob.
4
Turn the volume knob to select an item, then press the knob.
1 to 30 (in seconds)/ OFF (default)
5
Press and hold to exit.
To return to the previous setting item, press
14 ENGLISH
Make a call
You can make a call from the call history, phonebook, or dialing the
number. Call by voice is also possible if your mobile phone has the
feature.
1 Press
"(First device name)" appears.
• If two Bluetooth phones are connected, press
.
another phone.
"(Second device name)" appears.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
the instructions stated on the selected item.
4
Press and hold
To return to the previous setting item, press
CALL HISTORY
.
to enter Bluetooth mode.
2
until the desired item is selected/activated or follow
to exit.
(Applicable only if the phone supports PBAP.)
1 Press the volume knob to select a name or a phone number.
• "I" indicates call received, "O" indicates call made, "M" indicates call
missed.
• Press DISP to change the display category (NUMBER or NAME).
• "NO DATA" appears if there is no recorded call history.
2 Press the volume knob to call.
again to switch to
.