Table of Contents
Advertisement
1.
Windows™ Software Installation
1.1.
General
The UHBX-3S/6S graphical user interface (GUI) is Windows™ software used to
configure advanced settings of the UHBX-3S/6S. The software requires a USB
connection from the PC to the device. A USB cable is provided with each device.
The GUI can monitor and configure several devices simultaneously. PCs that have
multiple USB ports or use external USB hubs can use the same GUI and address each
device individually.
This manual is applicable to both the UHBX-3S and UHBX-6S models. The illustrations
figures herein are representative for both models and there might be slight changes
between the actual GUI software.
1.2.
Installation Prerequisites
•
A PC with Windows XP™ OS or later
•
USB port
•
Microsoft™ .NET Framework 2.0 or later (most recent OS including Windows 7 and
10 typically include this and no action is required). If .NET Framework 2.0 or later is
not installed on your PC, the Microsoft™ website has free downloads available.
1.3.
Software Installation
•
If any version of this software was previously installed, UNINSTALL the program
first from either the Add/Remove Programs section of the control panel or by
running the previous installation SETUP.EXE and selecting "remove application".
•
Install the software by executing the SETUP.EXE program from the installation
source directory
•
Most users can accept the default settings, but if you want to specify a particular
installation directory other than the default, you may do so.
•
Once the UHBX-3S/6S software installation has completed,
either click the desktop icon or navigate the Start Menu to
Start Programs Hall Research UHBX-3S/6S Manager
© Copyright 2014. Hall Research, Inc.
All rights reserved.
UHBX-3S and UHBX-6S
1
Advertisement
Table of Contents
