2-channel hdmi 2.0 splitter with analog and optical audio output supports 4kx2k uhd video (10 pages)
Summary of Contents for Hall Research Technologies UHBX-3S
Page 1
Software GUI User’s Manual EDID & Configuration Manager Software UHBX-3S/6S and UHBX-6S CUSTOMER FREE support, Call 714-641-6607 or email support@hallresearch.com SUPPORT Hall Research, 1163 Warner Ave., Tustin, CA 92780 UMA1220 GUI Supplement INFORMATION Web site: www.hallresearch.com Rev A...
Device Name 2.6. Status Bar 2.7. Tool Bar Menu 2.8. Firmware Update Trademarks Hall Research and its logo are trademarks of Hall Research Technologies, Inc. All other trademarks mentioned in this manual are acknowledged as the property of the trademark owners.
USB ports or use external USB hubs can use the same GUI and address each device individually. This manual is applicable to both the UHBX-3S and UHBX-6S models. The illustrations figures herein are representative for both models and there might be slight changes between the actual GUI software.
The UHBX-3S/6S Manager is a Windows GUI that to remotely control and monitor the UHBX-3S/6S device via a USB connection. It also provides you an ability to manage the EDID by learning it from a desired LCD monitor connected to any output, importing any custom EDID into the device, exporting the device’s EDID to a file, updating any future...
Video EDID The UHBX-3S/6S builds an EDID table that the source connected to the input can read. The EDID mode can be set to either emulate or pass-thru. Emulate - The internally stored EDID ...
Page 6
1 to 99, which makes communicating to a desired remote serial receiver easier when there are more than one UHBX-3S/6S devices connected in daisy chain. By default, Output 1 of each device starts with number 1, and this number will be incremented by one for the next output.
4K video. 2.4. Status The UHBX-3S/6S Manager provides you an instant status update on input video, the HDBaseT connection, and the current EDID passed to the video source. Input Video LED indicators display the input video status.
Page 8
UHBX-3S and UHBX-6S HDBaseT LED indicators display the HDBaseT status. On indicates the HDBaseT connection has been detected; otherwise, its LED is off. The cable length is in meters, and does not apply when in Long Reach mode.The calculation varies according to cable quality.
2.5. Device Name Assigns a descriptive name to the UHBX-3S/6S device that is a maximum 8 characters long. This information is stored in the device. Assigning unique device names to each device is useful to identify each device. This is handy if you are going to upload different...