Program Playback - Samsung HT-DL200 Instruction Manual

Program Playback

Use this function with video and music CDs to play the tracks in a particular order.
B
To Program Tracks in a particular order
1
Press the Program button.
Press the Enter button then
use the Number buttons to
select the desired title.
•
You can use also just the
Left/Right (
PROGRAM MENU SELECT : ENTER
TITLE CHAPT TITLE CHAPT
1 6
2 7
3 8
4 9
5 10
PREVIOUS NEXT
PLAY : FINISH : PROGRAM
4
Press the Enter button. At this time, you can
continue programming if you
want to.
•
The selected track number is •
When programming more than
programming and the cursor
10 tracks, select
moves to the next number.
then press the Enter button.
The program selection screen
where you can program up to
10 additional tracks appears.
PROGRAM MENU SELECT : ENTER
TITLE CHAPT TITLE CHAPT
1 1 2 6
2 7
3 8
4 9
5 10
PREVIOUS NEXT
PLAY :
FINISH : PROGRAM
To Cancel the Programming
21
Program
2 3
Press the Enter button, then
use the Number buttons to
select the desired chapter.
•
You can use also just the
/ / / ) button. Left/Right ( /
button.
PROGRAM MENU SELECT : ENTER PROGRAM MENU SELECT : ENTER
TITLE CHAPT TITLE CHAPT TITLE CHAPT TITLE CHAPT
1 6 1 1 2 6
1
2 7 2 7
3 8
3 8
4 9
4 9
5 10
5 10
PREVIOUS NEXT PREVIOUS NEXT
PLAY : FINISH : PROGRAM
PLAY : FINISH : PROGRAM
5
To Playback the
Tracks in the
Programmed Order
and
NEXT
Press the Play/Pause
( ) button.
PROGRAM MENU SELECT : ENTER
TITLE CHAPT TITLE CHAPT
1 1 2 6 4 1
2 1 2 7 6 2
1 3
3 7 8 4
2 3 5 5
4 9
2 4 1 2
5 10
PREVIOUS NEXT
PLAY : FINISH : PROGRAM
Press either the Program button or Stop ( ) button.
To Change the Program
1
Press the Up/Down (
button to select the track
number to be changed.
/ / )
4
Press the Enter button.
•
The cursor moves to the
number below.
To delete the entire Program
•
Press the Stop (
•
Press the Stop (
•
Press the Open/Close (
The disc tray will open and then close. The program will
then be deleted.
When you have entered a
wrong number
Press the Clear button.
•
When you want to delete a selection during
programming, select the track (or chapter, or title) to be
deleted and then press the Clear button.
2
/ ) Press the Enter button to Press the Clear button and
select the title or chapter to be then press the Number
changed. buttons.
•
The cursor moves to the next •
You can use also just the
number when the Enter
Left/Right (
button is pressed again.
5
Repeat steps 1-4 above to
change the program.
) button twice during playback.
) button once when in the Stop mode.
) button on the main unit.
Clear You can program or change
particular tracks for VCD or CD
discs in the same manner.
GB
3
/ ) button.
22