Listening To The Radio; Presetting Stations - Samsung HT-DL200 Instruction Manual

Listening to the Radio

You can listen to the chosen band (FM, MW or LW broadcast stations) by using either
the automatic tuning or manual tuning operation.
B
1
Remote
Press the Tuner(Band)
Control
button.
Unit
•
The selection toggles back
and forth between "FM" "MW"
and "LW" each time the
Tuner(Band) button is
pressed.
1
Press the Function button to
Main
select the desired band (FM,
Unit
MW or LW).
To Listen in Mono/Stereo
Press the MO/ST button. (only FM)
•
The selection toggles back and forth between "STEREO" and "MONO"
each time the MO/ST button is pressed.
•
In a poor reception areas, select Mono mode for a clear, interference-free
broadcast.
35
2
Select a broadcast station.
When the button is pressed, a preset
Auto Station 1
broadcast station is selected.
Hold in the button. Automatic searching
Auto Station 2
begins, and then stops when a station is tuned in.
Press the button to tune to the chosen
Manual Station
station. The frequency changes incrementally in either
direction each time the corresponding button is pressed.
2
Select a broadcast station.
Press the button to select the PRESET mode.
Auto Station 1
Then press the button to select a station
stored in the preset
Press the Stop ( ) button to select the MANUAL
Auto Station 2
mode on the front panel. Then hold in the
button to make the unit begin automaticall searching
for broadcast stations.
Manual Station
Press the Stop ( ) button to select the MANUAL mode
front panel. Press the button to tune to the
desired station. The frequency changes incrementally in either
direction each time the corresponding button is pressed.
Audio
MO/ST

Presetting stations

You can store up to:
15 FM stations
8 MW stations
7 LW stations
Example: Presetting FM 89.1 in the memory
1
Select the MANUAL by
Press the Tuner(Band) button
pressing the Stop (
and select the FM band.
button on the main unit.
•
The selection toggles back and forth between "
" each time the Tuner(Band) button is pressed.
MH
Z
L R L R
4 5
Press the Program button.
Use the
button to select FM2.
PROGRAM MH
Z
L R
L R
•
When using this feature for the
first time, be sure to store the
station in the preset memory at
FM1 as the unit does not come
preprogrammed with default
presets.
To change the Preset Stations
Repeat steps 3 to 4 above.
•
Store the changes while repeating
steps 1 to 4 above.
• FM Frequency Modulation
• AM(MW) Medium Wave
• LW Long Wave
2 3
Use the and
button to tune into 89.1
)
L R
6
and
Press the Program button.
•
The preset stations operation is
completed.
PROGRAM MH Z
L R
To store other Channels
GB
MH
Z
MH Z
36