Before Using The Dvd Player - Samsung HT-DL200 Instruction Manual

Connecting your System to the Power Supply
B
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check the voltage.
1. Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket.
2. Press the On/Standby button to switch your DVD Player system on.
SPEAKERS
R-REAR-L WOOFER CENTER
6 3 6
IMPEDENCE
Listening on headphones
Use headphones for private listening pleasure (not supplied).
Connect the headphones to the HEADPHONES jack of the front panel.
• No sound is produced from the speakers.
• To prevent hearing damage, do not raise the volume level excessively when
using headphones.
V I D E O
13
AV OUT VIDEO VIDEO S-VIDEO S-VIDEO
Y/C
SPEAKERS
ANTENN ANTENNA
A
R-FRONT-L COMP.
AUX1 IN AUX IN AUX2 IN
AM
VIDEO OUT VIDEO OUT
L L
R R
6
IMPEDENCE
Volume
Function
Phones
HEADPHONE jack

Before Using the DVD Player

Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions
carefully before use.
1
Turn on the power Select a video mode by
to your DVD player pressing the TV/VIDEO
Prepe-
and TV. button.
rations
before
TV
use
•
The "WAIT" message that appears on the display for about seven to eight seconds
when turning on the power or selecting a DVD function indicates a stabilization period
for optimizing the condition of your DVD player. While the message is being displayed,
other buttons remain inactive.
•
When the power is not turned on, press down the Stop (
over 5 seconds.
The inside of the product will be initialized to its optimum state.
•
If your TV model is not SAMSUNG, refer to "Remote Control Unit Setup" on page 28.
TV System Selection
Press the TV System button while in stop mode.
•
Each time the TV System button is pressed, "NTSC, PAL" are
selected in this order.
Different countries use different types of TV broadcast systems, video,
audio and channel systems.
Example : The player cannot playback PAL-encoded DVD with NTSC-TV.
CD-R/RW playback compatibility
•
Your DVD player can also play CD-R and CD-RW discs recorded in digital
audio format. When recording your own CD-R or CD-RW discs, make sure
that the recording session is properly terminated, or they will not be playable.
(Depending on disc properties and recording quality, some CD-R/RW may not
be playable.)
•
CD-RW has a lower reflection rate than CD-R media and consequently it will
take a longer to read CD-R discs.
•
CD-RW discs recorded at high speed tend to be difficult for the DVD player to
read. If the recording speed for the CD-RW disc is not predetermined, write it
at low speed.
2 3
Press the DVD button
to select the DVD input
function.
TV/VIDEO
DVD
) button on the main unit for
TV System
Zoom
GB
14