Dsp Function - Samsung HT-BD1252 User Manual

Setting the Sound Edit
Press the ▲▼ buttons to select Sound Edit,
4.
then press the ENTER or ► button.
Press the ▲▼ buttons to select the desired Speaker,
5.
then press the ◄► button to adjust the settings.
When done, use the ▲▼◄► buttons to select Save,
6.
then press the ENTER button.
If you don't want to save your settings, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
M

Press the RETURN butt on to return to the previous menu.
Adjusting Front/Surround Speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Surround/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to
-6dB.
• The sound gets louder as you move closer to +6dB and
quieter as you get closer to -6dB.
M

Press the RED(A) button to run the test tone with
the screen as shown; It operates the same as a
normal test tone.

Press the RED(A) button again to stop running the
test tone and return to the previous screen.
DSP(Smart Sound) Function
This will regulate and stabilize the volume level against a drastic volume change when changing
channels or during a scene transition.
Press the DSP button.
•
Each time the button is pressed, the selection changes as
follows:
S.SOUND ON ¨ S.SOUND OFF
AV Sync
Music
Test Tone
System
Photo
Language Speaker Distance
Setup Audio Sound Edit
◄
DVD DVD
Display
HDMI
Network
Parental
AV Sync
Music
Sound Edit
System Setup Test Tone
Photo
Language Setup
Speaker Distance
Setup
Audio Setup
◄
Sound Edit
DVD DVD
Display Setup
HDMI Setup
Network Setup
Parental Setup
Save Cancel
▲
A Test Tone Move Adjust
▼
Music
Dynamic Compression : On
System Setup
Test Tone
Photo
Language Setup AV Sync
Setup Audio Setup Test Tone
◄
DVD
D i s p l a y Speaker Distance
Setup
Sound Edit
USER
H D M I
Setup
N e t w o r k
Setup Surround Left
Parental Setup A Stop Return
: 50msec
►
: 50msec
►
Return
: 50msec
►
41