Transport Position - Husqvarna 535FBX Operator's Manual

Transport position

• Fit the transport guard to the cutting attachment.
• Dismantle the load reducer.
• Position the load reducer as shown and fasten it.
2
1
• Dismantle the shaft. Loosen the coupling by turning
the knob (at least 3 times).
• Push and hold the button (C). Pull the shaft straight
out of the clutch.
C
ASSEMBLY
• Position the shaft as shown.
• Wind the cord around the load reducer and the shaft,
then fasten it as shown.
• Hang the flex shaft onto the throttle handle as shown.
–
English 19