Specifications - Ecco ED3777 Installation And Operation Instructions Manual

CONTENTS:
1 Light Head
1 Multi-Mount Base:
Includes-
2- M4x25 Sheet metal screws
2- Split washers
4- M3.5x10 screws
2- M3 washers
1 Adhesive Pad
1 1- EVA foam gasket
1 Edge Mount Bracket
1 Surface Mount Bezel
Mounting:
Surface Mount
Edge Mount
Wire: ED3777
RED: Positive (need to add 2A Fuse)
BLACK: Negative
BLUE: Pattern Switch
YELLOW: Synchronized Function
(Up to 8 units can be Synchronized)
ORANGE: Takedown Light Operation (need to add 2A Fuse)
GREEN: Ground Light Operation (need to add 2A Fuse)
Operation Environment:
Ambient Temperature:
PHASE OPERATION:
Phase 1 (Ph1) flashes simultaneously with Ph1
Phase 2 (Ph2) flashed simultaneously with Ph2
(Up to 8 units can be Synchronized)
Apply BLUE TO BLACK wire:
-Less than 1 sec. for next pattern
-Between 1-3 sec. for previous pattern
-Between 3-5 sec. for factory default pattern
-More than 5 sec. default to pattern #13 (ED3777) and pattern
#12 (ED3777XX)
-30 to 50°C

SPECIFICATIONS:

Input Voltage
Work Current
ED3777XX = 3.6A Max @ DC12V
Important!
This unit is a safety device and it must be
connected to its own separate, fused power point to assure its
continued operation should any other electrical accessory fail.
Caution:
When drilling into any vehicle surface, make sure the
area is free from any electrical wires, fuel lines, vehicle upholstery,
etc. that could be damaged
Adhesive Mount
Permanent Mount
Wire: ED3777XX
RED: Positive, Colors 1 & 3 (need to add 5A Fuse)
WHITE: Positive, Colors 2 & 4 (need to add 5A Fuse)
BLACK: Negative
BLUE: Pattern Select to negative
YELLOW: Synchronized Function
(Up to 8 units can be Synchronized)
ORANGE: Takedown Light Operation (need to add 2A Fuse)
GREEN: Ground Light Operation (need to add 2A Fuse)
PRODUCT
ED3777AW
ED3777BW
ED3777RB
ED3777RW
ED3777AG
ED3777AB
ED3777AR
12-24VDC
ED3777 = 1.8A Max @ DC12V
RED WHITE
1 & 3 COLORS 2 & 4 COLORS
AMBER WHITE
BLUE WHITE
RED BLUE
RED WHITE
AMBER GREEN
AMBER BLUE
AMBER RED
Page 2 of 9