ETEKCITY ZAP 1FX Manual

Outdoor Remote
Control Outlet
Model No.: ZAP 1FX
Questions or Concerns?
(855) 686-3835 • support@etekcity.com
Operation
The outlet is pre-programmed for immediate use, but the
configuration can be customized to meet your needs.
1. Install one 12V/23A battery into the remote control.
2. Plug the outlet into a powered socket.
1 2
FCC ID:2AB22-ZAP1FXT
3. Plug an appliance into each outlet. Keep the appliance
switch to 'ON' in order to allow the outlet to control the
device.
4. Press the 'ON' or 'OFF' button for the corresponding
letter on the remote.
Thank You.
Thank you for purchasing the ZAP 1FX Outdoor Remote
Control Outlet by Etekcity. We are dedicated to providing
our customers with quality products for building a better
living. Should you have any questions or concerns about
using your new product, feel free to reach out to our helpful
customer support team at (855) 686-3835 or by email
at support@etekcity.com. We hope you enjoy your new
product!
Package Contents
1 x Remote Control Outlet
1 x Remote Control
1 x 12V/23A Battery
1 x User Manual
Safety Information
IMPORTANT: Please read and comply with all of the
instructions and warnings provided in this manual before
using the product. Failure to comply with the instructions
and warnings provided herein may result in inaccurate
results and/or damage to the product itself.
Important Safety Information
• The wireless range may be shortened by other
electronic devices, appliances, walls, and other physical
barriers.
• This outlet is intended for outdoor use, but can also be
used indoors.
• Avoid exposing the outlet to moisture.
• DO NOT exceed the maximum load current of 10A
(approximately 1200W).
3 4
Reprogramming an Outlet
1. Unplug device from the outlet.
2. Press and hold the programming button until the
indicator light starts to blink.
1 2
press
and
hold
• DO NOT use appliances such as refrigerators, air
conditioning units, and washing machines with the
outlet. Such appliances exceed the maximum load
current of 10A (1200W).Keep out of reach of children.
• To avoid overheating, this outlet is best used in areas
with proper air circulation.
• For your safety, make sure the batteries within the
remote is correctly installed before use.
• DO NOT dispose any part of this product in a fire.
The remote is not compatible with rechargeable
batteries.
• This device is not intended for use in areas with high
humidity, such as bathrooms.
• For best results, regularly change the battery in the
remote control.
If the remote is not in use for an extended period of
•
time, remove the battery from the remote.
Discard all parts of this product in accordance with
•
local environmental regulations. Do not dispose in
regular household waste.
• This outlet is not compatible with the ZAP 3VX, 5LX,
5LX-S remote outlets, or with older remote-controlled
outlet models.
CAUTION: To Reduce the Risk of Electric Shock – Use Only
Indoors.
ATTENTION: Pour réduire le risque de choc électrique -
Utiliser uniquement à l'intérieur
CAUTION: Risk of Electric Shock. Do not plug into another
relocatable power tap or an extension cord.
ATTENTION: Risque de choc électrique. Ne le branchez pas
sur un autre robinet d'alimentation relogable ou sur une
rallonge.
CAUTION: Use only in dry locations
ATTENTION: Utiliser uniquement dans des endroits secs
3 4
3. Release the program button, press the "ON" or "OFF"
button for the desired number on the remote.
4. Pairing is successful when the indicator light stops
blinking. The indicator light on the corresponding outlet
will turn on, confirming that the outlet is now in use.
NOTE: You may repeat the re-programming steps to assign
up to 10 outlets to a single letter to simultaneously control
multiple devices with a single click.
Resetting an Outlet
To remove an outlet from all remote control pairings:
1. Unplug any devices connected to the remote outlet.
Remove the outlet from the power socket.
2. Press and hold the program button.
Function Diagram
1. Outlet
2. Power / Program Button
3. Outlet Indicator Light
4. Remote control
5. On Buttons
6. Off Buttons
7. Battery Compartment
3
2
4
6
5
FCC ID:2AB22-ZAP1FXT
1 2
press
and
hold
3. Plug the outlet back into the power socket while
continuing to hold the program button.
4. Program reset will be complete when the indicator light
stops blinking.
3 4
1
7