ION Air Pro 3 Quick Start Manual page 7

Please refer to the specific mounting guides for instructions on how to install your mounts with your
camera for particular activities.
1. Fit the screw of the CamLOCK to the tripod socket of the camera.
2. Screw the CamLOCK until it is tight on the camera.
4.3 Mounting on Your Helmet
Before mounting, make sure the surface of the helmet on
which the double faced adhesive will be adhered is clean
so that the helmet mount can be affixed strongly on the
helmet.
1. Loosen the ball joint nut from the helmet mount.
2. Install the ball joint to the helmet mount and tighten the nut.
3. Adhere one side of the double faced adhesive to the base of
the helmet mount, then peel and stick the other side to the
helmet to permanently secure the mount to the helmet.
4. Attach the CamLOCK and camera into the CamLOCK socket.
Ensure that the ball joint nut is tightened securely.
Notes:
1. The CamLOCK system allows you to change the angle of the camera. Simply loosen the nut,
adjust the camera angle and retighten the nut.
2. You can use the same helmet mount to mount the camera on a motorcycle helmet by
purchasing the other optional mounting kit.
5. iON Software Application
The iON Software Application for Windows or Mac lets you connect to a computer by USB to:
1. View and copy the files stored on the camera
2. Change the camera settings (Mac is not supported)
3. Set the Date & Time (Mac is not supported)
4. Format the camera's card
5. Link to the iON website and cloud service
6. Check the firmware update
5.1 Windows Software Application
The Windows iON.exe Software Application comes installed on the camera. To run the application:
1. Insert a MicroSD card with at least 2MB free space into the camera.
2. Press the Power button to turn the camera on.
EN-7