Sealing Your Camera To Prevent Water Damage - ION Air Pro 3 Quick Start Manual

9. Sealing Your Camera to prevent water damage

The Wate rproof Housing (standard PODZ on iON Air Pro 3 camera and Wi-Fi PODZ in Air Pro 3 Wi-Fi)
all ows you to operate the camera up to 10 meters or 30 feet under water. You must seal the camera
wit h t he PODZ in order to protect the camera when using it in wet or moist conditions.
No s: te
1. The rubber seal on the PODZ forms the waterproof barrier to protect the camera in wet and
underwater conditions. You m
can caus e leakage into the product.
2. After every use in salt water, you will need to rinse the outside of the product and the seal
non-salt water and dry. Not doing this can cause corrosion in the product or failure in the se
turn, damaging the product.
War ning:
Please ensure you install and lock the PODZ co
camera to avoid water damage. Failure to properly seal your camera can
result in leaks that dama
co ver water
1 0. Troublesho
Proble ms
1. LED flashes and t
camera turns off
2. The iON camera will
not turn on.
Green LED flashes
during recording
Cannot take photo
video (Blu e LED
flashes)
Cannot take photos or
video (Blue LED
flashes)
Cannot find removable
disk after connecting
the camera to the
comp uter.
ust keep this seal clean as a single strain of hair or grain of sand
ge or destroy your camera. Your warranty does not
damage resu lting from
oting
Causes
he
Battery is depleted
Low battery
s or
Memory full
1. MicroSD card is
2. MicroSD card has not been
formatted properly.
Connection failure
rrectly before using the
user damage.
Recharge the camera
Recharge the camera
Replace with a memory card with
space available .
not inserted
1. Insert a MicroSD card
2. Format the MicroSD card
1. Make sure all cable connections are
secured and restart the computer if
.
necessary.
2. Try a different USB port.
Solutions
on a PC
with
al, in
EN-11