Using Your Camera; Recording Videos - ION Air Pro 3 Quick Start Manual

3. Using Your Camera

3.1 Charging up Your Camera
Charge your camera with either the USB cable or AC/DC adapter. The red LED will light up to indicate
the camera is charging and it will turn off once the camera has been fully charged. It takes about 3
hours to fully charge the camera.
3.2 Inserting a Memory Card
Insert a MicroSD card up to 64GB (not included) before using your camera. Ensure that the camera
power is turned OFF before inserting the card into the slot.
Notes:
1. There is only one correct direction to insert the MicroSD card into the slot. Do not force the card
into the card slot as it may damage both the camera and the MicroSD card.
2. A new MicroSD card should be formatted before using. For more information, please see section
4.2.
3. We recommend a class 10 SDHC card.
3.3 Setting up Date and Time
Connect your camera to a computer and run the iON software from the MicroSD card folder. You can
set the date and time on the camera via the settings page. Please see
section 4.1 to open iON software
3.4 Installing the PODZ
1. Attach the PODZ to the back of the camera and rotate clockwise until
the two dots are aligned.
2. Slide the latch on the PODZ to lock it.
WARNING: The latch must be locked in place to ensure the waterproof
is activated – failure to do so may cause water leakage.

3.5 Recording Videos

Before starting to record, select the video resolution using the Video Resolution Switch.
There are two methods for starting the video recording function. When the camera starts recording,
there will be a short vibration indicating recording has started. The LED indicator illuminates GREEN
throughout recording.
1. Whether the camera power is ON or OFF, simply slide the Recording Slide Switch
from STOP to REC to start recording.
seal
EN-5