ION Air Pro WIFI Quick Start Quide

Quick Start
Thank you for purchasing the ion AIR PRO WiFi HD sports video
camera. The ion AIR PRO with WiFi PODZ allows you to connect to
mobile devices and PCs without using cables. Use your mobile device
as a viewfinder (Live Streaming) or seamlessly transfer your
photos and videos from your camera to your mobile device and social
media sites. The ion AIR PRO can be mounted with the Bike &
Helmet Kit or the BOARD Kit for the ultimate adventure HD
recording experience.
Getting to know your AIR PRO WIFI camera

AIR PRO is a Professional, High Quality Digital Video
Recorder that records in Full HD video using an easy slide
switch.

5 Mega Pixel Sensor for great digital photographs

Your camera supports a Micro SD card up to 32GB, which allows
you to take video in 1080p with 30 frames per second for about
4 Hours.

The embedded 1200mAh Li-Polymer Battery can be recharged
quickly.

The Waterproof Housing lets the camera perform up to 10
meters under water.

AIR PRO is about 4.6 ounces or 130g.

WiFi PODZ provides the Wireless Capability to your ion camera.
You can access and transfer your photos and videos to your PC,
mobile phone or tablet. It also turns your mobile device into a
viewfinder, allowing you to live-stream the camera view on your
mobile device.
1. Getting to Know Your Camera
1. Turn the camera on or off
1 Power
2. Take a single photograph
2 LED indicator Show the camera status
Recording Slide
3 Slide to start or stop video recording
Switch
4 Lens
Fixed Focus (2ft/.6m), glass
5 Micro SD card slot Micro SD card storage location.
6 AV port Connect the camera to TV via Composite cable
7 Mini HDMI Port Connect the camera to TV via HDMI cable
Video Resolution
8
Select video resolution: FHD (Full HD) or HD.
Switch
1. Connect to computer for data transfer or camera
9 USB Port setup
2. Charge your camera
10 Reset button Reset the camera
Connect PODZ to the camera to achieve additional
11
PODZ Socket
function
WiFi PODZ Back
12 Rotate to seal the camera
Cover
WiFi PODZ Power
13 Turn the WiFi on or off
Button
2. Using Your Camera
2.1 Charging
Charge your camera with either the USB cable or AC/DC adapter. The LED will
be red when the camera is charging and turns off when the camera has been fully
charged. It takes about 3 hours to fully charge the camera. The camera will be at
80% capacity after 1 hour through the power adapter, or after 2 hours with a
computer's USB port.
2.2 Memory Card
The camera uses a Micro SD or SDHC Card up to 32GB (not included.) We
recommend using an SDHC Class 6 or higher card.
1. Always insert and remove the card with the power off. Not doing so can
damage the card.
2. There is only one correct direction to insert the MicroSD card into the slot. Do
not force the card into the card slot as it may damage both the camera and the
MicroSD card.
3. A new Micro SD card should be formatted before using for more than initial test
purposes. For more information, please see sections 4 and 6.
2.3 Set up Date and Time
The Date & Time are changed using the ION software application Please see
section 4.
2.4 Sealing Your Camera
The Waterproof Housing lets the camera perform in up to
10 meters or 30 feet under water. You must seal the camera
with PODZ to protect the camera when using it in wet or
moist conditions.
To attach the PODZ
1. Position the PODZ on the back of the camera and press
gently to push the PODZ flush to the back of the camera.
2. Rotate the PODZ clockwise until the two dots are aligned.
The PODZ should rotate easily when properly positioned.
Never force it which could damage the lock and the seal.
2. Slide the latch on the PODZ to lock it.
Notes
1. Failure to properly seal your camera can result in leaks
that will damage or destroy your camera. Your warranty
does not cover water damage resulting from user damage.
2. The rubber seal on the PODZ forms the waterproof
barrier to protect the camera in wet and underwater
conditions. You must keep this seal clean as a single strand
of hair or grain of sand can create a leak into the product.
3. After every use in salt water, you will need to rinse the
outside of the product and the seal with non-salt water and
then dry. Not doing this can cause corrosion in the product
or failure in the seal, in turn, damaging the product.