ION Air Pro 3 Quick Start Manual page 10

8.3. Using the Wi-Fi PODZ
8.3.1 Installing and turning on the Wi-Fi PODZ
1. Remove your standard PODZ from the back of the camera
and place your Wi-Fi PODZ into the camera PODZ socket.
(follow steps 1 and 2 under section 3.4)
2. Press and hold the Power
camera.
3. Press the Wi-Fi power button on the Wi-Fi PODZ to turn on
to indicate the Wi-Fi is warming up. It will take around 15-20 seconds for the Wi-Fi to warm up
and become connectable. The LED will flash when the Wi-Fi function is active or connected.
4. Press the Wi-Fi power button to turn off the Wi-Fi anytime.
N ote:
Wi-Fi will drain your camera battery more rapidly when activated. Turn the Wi-Fi off if you are
not using it to change settings or upload content.
8.3 .2 Connecting the Camera to Your Computer
1. Turn on your camera and Wi-Fi PODZ.
2. Go to the network settings of your PC and choose Wi-Fi settings. Search the network, find and
click "WIFIPODZ".
3 . Enter passw ord "123456789" and to connect to your camera.
4. Open your Internet browser and input "192.168.1.2". You will then
in your camera.
8.3.3 C onnecting the Camera to Your Smart De
1. Search iontheaction app in your devices app store.
2. Download and install the app to your smart device.
3. Turn on your Wi-Fi PODZ.
4. Go to the networ
and click "WIFIPODZ".
5. Enter password "123456789" to connect to your camera.
6. Open your app.
7. Please refer to the app page for detailed operating instructions.
button to turn on your
k settings of your device and choose Wi
your Wi-Fi. The blue LED lights up
be able to view the files stored
vice (App)
-Fi settings. Search the network, find
EN-10