Configure The Rfid Service Settings; Configure The Bri Server Settings - Intermec IP2L User Manual

Configure the RFID Service Settings

Configure the BRI Server Settings

DRAFT
IP2L Snap-On LF/UHF RFID Reader User Guide
When enabled, the RFID Service allows an application to
communicate with the RFID reader. You can disable the service if
your computer requires more processes or if you are not using RFID.
1 Go to Intermec Settings.
2 Tap the RFID > Enable RFID Service.
3 Select Enable RFID Service to enable the service, or clear it to
disable the service.
4 Tap OK. Your settings are saved.
Configure the BRI Server to handle communications between your
application and the RFID module.
1 Go to Intermec Settings.
2 Tap the RFID > Application Connection.
3 Configure the BRI Server settings.
4 Tap OK. Your settings are saved.
BRI Server Settings Descriptions
Setting
Allow BRI External BRI
Connections
BRI TCP Port
Enable Logging
Chapter 2 — Create and Use RFID Applications
Description
This allows an external application to
establish a BRI connection to the RFID Data
Collection Engine instead of the virtual wedge.
This allows the Data Collection Engine BRI
port to collect data from the RFID reader. Set
the TCP port to something else if the default is
already being used.
This logs all RFID activities when you are
troubleshooting the RFID reader.
15