About The Status Leds - Intermec IP2L User Manual

Chapter 1 — About the IP2L Features

About the Status LEDs

DRAFT
8
When the IP2L is connected and enabled, the status LEDs turn on,
turn off, or blink to indicate RFID activity on your computer.
Good Read LED
Notification LED Battery status LED
Location of the Status LEDs
Status LED Descriptions
Callout LED
1 Notification
2 Good
Read
3 Battery
Status
Color Description
Amber The computer is searching for an
RFID tag
Blinking The computer successfully reads or
green writes to a tag.
Blinking The computer unsuccesfully writes to
red a tag.
IP2L Snap-On LF/UHF RFID Reader User Guide