How To Install Speakers - Samsung PS-50P4H Owner's Instructions Manual

ENG
Parts
The actual product may differ
slightly from the illustration.
Middle Cabinet
(Wall Mount Only)
Speaker Dust Cover
Screw
: 2EA
W W W W A A A A R R R R N N N N
1. When moving the PDP with the speakers attached, be sure to hold on to the PDP to prevent damage.
(Damage may occur to the speaker connecting brackets or the speakers.)
2. Speakers of 8Ω Impedance, 15W Nom. Power, 30W Max. Power is recommended.

How to Install Speakers

Speakers
2 EA
1 EA
1 EA
Speaker Cable
Screws
Screw
: 6EA
I I I I N N N N G G G G
60
This speaker installation guide is for the 5040 Model.
How to Assemble the Speakers(Standing)
Remove the screws indicated on the rear of the PDP
(6 screws on the left and right sides).
Set the Speaker Guide Bracket into the square grooves
located on either side of the PDP's bottom rear then push
the Speaker Guide Bracket towards the center (as the arrow
illustrates). Secure the Speaker Guide Bracket with provided
screws @. (Always use the proper screws, as indicated.)
screw@
Secure the Speaker Dust Cover by setting it into the
grooves located on the front side of the speakers.
Connect the speakers to the PDP using the speaker cable.
The connection terminals are on the rear side of both the
PDP and the speakers.
(Match the color coded terminals and cables.)
BLACK
BLACK RED
RED