Samsung PS-50P4H Owner's Instructions Manual page 61

How to Install Speakers
Parts
The actual product may differ
slightly from the illustration.
Speakers
2 EA
Middle Cabinet
(Wall Mount Only)
1 EA
Speaker Dust Cover
1 EA
Speaker Cable
Screws
Screw Screw
: 2EA : 6EA
W W W W A A A A R R R R N N N N I I I I N N N N G G G G
1. When moving the PDP with the speakers attached, be sure to hold on to the PDP to prevent damage.
(Damage may occur to the speaker connecting brackets or the speakers.)
2. Speakers of 8Ω Impedance, 15W Nom. Power, 30W Max. Power is recommended.
(continued)
How to Assemble the Speakers(Wall Mount)
Remove the screws indicated on the rear of the PDP (6
screws on the left and right sides, 2 screws on the center).
Set the Speaker Guide Bracket into the square grooves located
on either side of the PDP's bottom rear then push the Speaker
Guide Bracket towards the center (as the arrow illustrates).
Secure the Speaker Guide Bracket with provided screws @.
Secure the Middle Cabinet to the center of the PDP with a screw
!. (Always use the proper screws, as indicated.)
Screw!
Screw@
Secure the Speaker Dust Cover by setting it into the
grooves located on the front side of the speakers.
Connect the speakers to the PDP using the speaker cable.
The connection terminals are on the rear side of both the
PDP and the speakers.
(Match the color coded terminals and cables.)
BLACK
BLACK RED
RED
61
ENG